Here are some essential Armwrestling Table specifications listed below:
- Elbow and pin pads use rubber or high-density foam, and are upholstered and screwed on the top surface with multiple bolts in case of the tabletop.
- Sit-down armwrestling table seats are padded with 1/4″ foam and upholstered.
- The type of frame is made of square tubing or pipe and is bolted securely to plywood that is ½ inch thick x 38 inches wide, and at least 5 feet long.
- Tabletop measurements are 26” wide x 38” long, with a solid round peg of 6” high that is 1″ from the edge of the table and set in 1″ from the opposite edge. Table dimensions are 36” long from center to center.
- A new sitting area is supported with all AAA/WAF chair standards at 18″ square x 18″ high from floor to top.
WAF STAND UP AND SIT DOWN TABLE (use in international events)
- Elbow pads are 7 inches square by 2 inches thick, inserted from the competitor edge of a table at 2 inches from the center. The left edge of the elbow pad is 16 1/2 inches from the center of the left peg, and the right edge of the elbow pad is 12 1/2 inches from the center of the right peg.
- And this is how we get a good overall gate height measurement for the machine by using a pin pad as our reference point.
- The seats themselves are 18 inches square by 18 inches high, with a seat top that sits exactly under the table edge and is attached to the frame.
- Stand up height is left to be customized based on armwrestling table size
